oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if70.0m-06a 70.0mhz if saw filter 6.41 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if70.0m-06a january 2011 rev a 70.0mhz if saw filter 6.41 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=100 nh, l2=33 nh output l3=33 nh, l4=100 nh source/load impedance 50 ?
oscilent part number 835-if70.0m-06a january 2011 rev a 70.0mhz if saw filter 6.41 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 26.8 29.0 absolute delay us - 4.73 4.80 temperature coefficient ppm/ c - -18 - amplitude ripple (fo3.125mhz) db - 0.57 1.00 group delay variation (fo3.125mhz) nsec - 52 100 bandwidth at -1db mhz - 6.41 - bandwidth at -3db mhz - 6.60 - bandwidth at -40db mhz - 7.35 7.40 bandwidth at -50db mhz - 7.41 - ultimate rejection db 42 48 - relative attenuation delta 625khz db - 45 -
oscilent part number 835-if70.0m-06a january 2011 rev a 70.0mhz if saw filter 6.41 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db relative attenuation
oscilent part number 835-if70.0m-06a january 2011 rev a 70.0mhz if saw filter 6.41 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation (fo3.125mhz) group delay variation (fo3.125mhz) smith chart
oscilent part number 835-if70.0m-06a january 2011 rev a 70.0mhz if saw filter 6.41 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
